| Age | Commit message (Collapse) | Author |
|---|
|
This brings a bunch of improvements. I got rid of some custom packages, I can
now build exllama without using a non-default cuda version. Oh yeah and I get to
use GHC 9.6.2 now, a huge upgrade from 9.4. Unfortunately I also updated ormolu
and some unrelated formatting changed, but that's life I guess.
|
|
Apparently `$COLUMNS` is a POSIX standard, which allows us to set the print
width to however wide the user's terminal is. This is a better UI on both wide
and narrow terminal layouts: on very narrow layouts, the terminal will properly
clear the line instead of doing the wrap-print thing it does when the line
overflows, and on wide layouts you can see more of the log message if you're
curious. This only works if you export `$COLUMNS` though, because bash only sets
the variable in interactive mode, so by default a running program doesn't see it.
<https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap08.html>
|
|
On timeout, bild would leave it's child processes still running, which means
that a long build would continue to go in the background, and I'd have to
manually find and kill it. The fix was simply to use Conduit's
`closeStreamingProcessHandle` function, and make sure that Conduit created a
group for the processes (by default it doesn't).
I tested this by building and running `bild` with a very low timeout (1 minute)
and watching `gotop` to make sure it stopped the active build process. I
couldn't figure out a simple way to test this automatically.
|
|
I guess this was the real cause of the constant reloads, it was getting
annoying.
|
|
I didn't even realize this would happen, but obviously it would. So my CI system
was trying to run tests on all note commits, and throwing weird errors
obviously, and probably recursing into an endless void of git pushes.
|
|
This was silly, maybe I should add a special case to Lint.hs to check these...
|
|
Add ccache support to the OsBase definition, so it's automatically setup for all
machines. Hopefully this can speed up builds and at least prevent the worst case
performance.
Unfortunately, if I modify the stdenv of any upstream targets, the cache is
invalidated and I have to rebuild the whole package. In particular webkitgtk is
a pain to build, and it has crashed my machine a number of times. I was able to
build it once, after enabling zram, which should be enabled anyway like why not?
- https://nixos.wiki/wiki/CCache
- https://github.com/NixOS/nixpkgs/issues/195522#issuecomment-2043999608
- https://github.com/NixOS/nixpkgs/pull/216363#issuecomment-2043998790
|
|
This is mostly helpful when debugging or writing programs, not during usage, but
I shouldn't be suppressing errors anyway.
My first version of this patch used `Biz.Log` instead of `panic`. Unfortunately
this exposed a bug in bild: Control/Concurrent/Go.hs (and others) failed to
build because it imported `Biz.Cli` which imported `Biz.Log`, and bild couldn't
find `Biz/Log.hs`. So apparently my function `detectHaskellImports` doesn't
detect all Haskell imports, somewhere along the lines I cut the graph short
instead of recursing. I guess that will be a project for another day.
|
|
Apparently, docopt only parses short opts if they are separated by a single
space from the long opt. I used two spaces, to make it line up with -h below.
:facepalm: So anyway just flip them, to line up.
|
|
This change was motivated by my testing of tabbyAPI. I kept doing like
`nix-build -A pkgs.tabbyAPI` and I thought, can't bild just do this? So I wrote
a file called TabbyAPI.nix with the following contents::
{ bild }: bild.pkgs.tabbyAPI
and it worked, I just needed this change to Bild.hs to supply the `bild`
argument. The benefit of using bild here is that I can get the logging,
concurrency settings, and linking to _/nix etc all by default. Plus, using a
standalone nix file like TabbyAPI.nix might be a good way to pin some package
in the build system and make sure it continues to build, test, and so on.
Also, thie means I don't sprinkle relative paths to the Bild.nix library
throughout the repo, which is bad practice anyway.
Re: explicitly exposing refernces to stable: This keeps things a bit more tidy
and less confusing when working on the nix library.
|
|
This patch fixes two problems:
1. Apparently the docopt spec wasn't written correctly, I needed to add a
metavar (like N for number) to the spec so that docopt would correctly parse
the command line args. Without this, I had just been using the default 6 and
10 that I hardcoded.
2. I never added the --max-jobs and --cores flags to NixBuild, so anytime I
built a nix target, i.e. any of my NixOS images, it would use all of the
available cores. I think this is part of why I struggled so much to build
webkitgtk: I *thought* I was limiting the resources to prevent an OOM crash,
but I wasn't.
With this fix, I can comfortably limit resources for a build, so I can continue
working while building something in the background.
|
|
Such a simple change but could potentially save seconds on every bild invocation
because I have to go to disk and read the file and so on. I really should have
caught this the first time I wrote it.
|
|
I got annoyed losing my well-crafted commit message one too many times.
|
|
This patch does a few things:
1. Switches from nixpkgs-unstable to nixos-unstable{,-small}, simply because
nixpkgs-unstable is not in cache.nixos.org, but nixos-unstable is, and -small
is the same but requires all tests to pass. So we should prefer
nixos-unstable-small, whenever possible.
2. Reorganizes the nixpkgs import code such that Nixpkgs.nix returns an attrset
of all the nixpkgs that I want to use, rather than putting other nixpkgs
branches into the main one as an overlay. This is much simpler and explicit,
but it meant I had to change a lot of usages throughtout the nix codebase.
3. As a consequence of 2, moves the overlays into separate files so they can be
re-used across nixpkgs branches.
|
|
I tried to add it to Lint.hs but I can't because mypy needs the target's
external libraries in its environment to load and check the types for that
dependency. So instead, I just added a function to the REPL environment that
runs the type checker. I already had mypy in the REPL environment so I must have
started down this path before and just didn't add the REPL tooling.
The automatic typechecking on load feels like Haskell. A previous version of
this patch had just provided a `typecheck()` function to the REPL, but it felt
awkward to type all that out just to check my code after loading it.
I would like to bind a key like ctrl-r or alt-r to the `reload()` function, but
I'm not sure how to do that. I think Python uses GNU readline so there should be
some docs, but a first pass search didn't find what I needed.
|
|
Ruff is faster and if it supports everything that black supports than why not? I
did have to pull in a more recent version from unstable, but that's easy to do
now. And I decided to just go ahead and configure ruff by turning on almost all
checks, which meant I had to fix a whole bunch of things, but I did that and
everything is okay now.
|
|
I always want to push notes on a successful code push, so using the pre-push
hook to do so is perfect. This also expands the pre-push hook to handle
new/deleted branches, configures notes automatically, and finally checks that
commit messages are decent with gitlint, since `git amend` can bypass the git
commit-msg hook.
|
|
Adding some helpful info to the repl startup because I kept forgetting that I
even had this reload function. Also, don't call it 'r' because I often do like
r = some_function()
to store results, and then I can't reload anymore.
|
|
I realized that tidy was doing the same thing as git clean, but git clean can do
it more robust and exactly. So switch to that and add it to the git test config
aliases so I don't accidentally test with old artifacts.
|
|
This started failing recently, I think because my key expired or something.
Anyway I shouldn't be doing network requests in unit tests. So until I figure
out how to design a test suite that can handle network requests in a sensible
way, just skip these tests.
|
|
This seems to be needed for git test to work, specifically because in a new
worktree, git is not configured, and direnv is not loaded to auto-configure
these settings. At least that's as far as I can tell what's going on. In either
case, best not to rely too much on git anyway.
|
|
This seems to be needed for git test to work, in particular the directory inside
the nix sandbox is like '/build/<name-of-checkout-directory>' which, in the case
of git test, is the name of the worktree that git-branchless uses to checkout
the commit under test. This is something like 'test-worktree-2'. So, I can't
hardcode anything there.
|
|
The whole point is to catch errors and write the result to the git notes, if the
process exits then we can't do that.
|
|
Uses git test to run CI on every commit before push.
|
|
It got out of sync with the code even within commit
7597d51ed4c866f596fb690d4d53d70bc01181b4, I dunno how I let that happen.
|
|
Removes my custom llama-cpp build and instead pulls in the upstream build from
nixos-23.11.
|
|
Using the same methodology as in d56f05863d789423ff785cec654155d8495373a9, where
I add additional nixpkgs via an overlay, I added access to nixos-23.11. I also
renamed the nixpkgs-stable dep to be more appropriate, given that it comes from
the nixos-23.05 git branch. I'm nost totally sure about the naming of the attr
in the overlay, maybe it should be 'stable-23_11'? But I feel like for
discoverability purposes it should be the same as the name in deps, so I'll just
stick with that.
|
|
This seems to be a bug in nixos, and disabling it is easy enough and doesn't
seem to break anything.
https://github.com/NixOS/nixpkgs/issues/180175
|
|
Apparently git hooks don't get called if they have a file extention, so these
weren't getting called at all since commit
904de577261e7024373e7a42fd763184764238f9. So this renames them back to the
extension-less versions, and adds an exception in bild for files in the
core.hooksPath directory.
Unfortunately this means Lint.hs will silently ignore these files, but I guess
that's okay for now.
|
|
I just like these UI settings better is all.
|
|
I was already using .sh to refer to shell scripts. When I added .bash, I didn't
realize that the linter was set to act on .sh files and not .bash files, so all
of these bash scripts escaped the linter.
This commit renames them to .sh, removes the .bash extension support from
Biz.Namespace, and fixes all the reported shellcheck errors.
|
|
nixfmt is the soon-to-be official formatter for Nix code, as per the NixOS
GitHub group. So I figure I should just adopt it without worrying too much about
the specifics of the formatting. I just formatted everything in one go, hence
the huge diff, oh well.
|
|
I (finally) switched my ISP account from my parents into my name, and they had
to restart my modem (ONT box?) to process this. So I got a new IP address.
|
|
By default, nix will use the maximum amount of cores available to the machine.
On my machine it was maxxing out the CPUs and then actually running out of RAM
when compiling JavaScriptCore and literally shutting down my machine. So, I need
to be able to control the concurrency and parallelism.
The default settings I chose should reserve 4 cores for the user.
I also changed --json to --plan because -j makes more sense for --jobs, as its
used this way in other tools like make and nix-build.
|
|
There are just too many packages that I need that are in nixpkgs unstable and
aren't in the release branches. Using it as an overlay like this means I can
just refer to the packages I want from unstable without pulling in all the
changes.
|
|
These just helped me when I tried to use it again and it didn't work and I
wasn't immediately sure why.
|
|
|
|
This should probably be enabled everywhere... oh well.
|
|
I couldn't get my monitor to work properly in xmonad, so decided to use gnome
for a while because I'll be away and will be using it headless from my macbook
anyway.
|
|
This was leftover from work on the previous commit. I don't think its actually
needed to get my stuff working, but these headers are recommended in the docs
and the latest version supposedly has some relevant bug fixes, so I decided to
commit this.
- https://github.com/Kozea/Radicale/issues/838
- https://github.com/Kozea/Radicale/issues/954
- https://github.com/Kozea/Radicale/issues/1247
|
|
This will allow me to create a public calendar to share with people instead of
using my iCloud calendar.
|
|
I need this to get gradio, I think.
|
|
These stopped working with the Lets Encrypt integration and I don't know why.
Just got a 404 when trying to check the .well-known endpoint. Also I don't know
how to debug this. So I guess just disable and try to fix later?
|
|
Added BILD_ARGS and removed the unused 'while read' so you can just call it
directly without having to supply arguments.
|
|
Even though I have 64 cpus, when I use them all for compilation, the UI still
lags, so that's annoying. Until I start using this for inference full-time,
offload the UI stuff to the GPU.
|
|
Just for my daily usage.
|
|
I'd much rather use GPG for key infrastructure. I'm not ready yet to fully
switch over all of these keys, but this works well so far in the gitolite-admin
repo so I'll test it out for a while before removing the old keys.
|
|
I don't really want my code to be discoverable, I only want people looking at it
if I have explicitly told them about it.
I tested it like so:
ϟ curl -v https://simatime.com/git/ 2>&1 | rg x-robots
< x-robots-tag: noindex, follow
|
|
The gitolite documentation is a bit of a labyrinth, but this should allow me to
set 'gitweb.description' and whatever other git-config settings in the
gitolite.conf file directly.
I'm also disabling gerrit, because I'm not using it and the service fails to
startup for some reason.
Some relevant gitolite docs:
- https://gitolite.com/gitolite/gitweb-daemon.html#gitweb
- https://gitolite.com/gitolite/conf.html
- https://gitolite.com/gitolite/git-config
|
|
BIZ_ROOT was too specific. CODEROOT allows for other (non-biz) projects to live
in the root of the repo. I didn't want to call it GIT_ROOT because maybe someday
I won't want to use git. But I'll never not use code.
|
